LTT Striker Control Device for Glock Handguns
Formerly developed by Tau Development Group, Langdon Tactical Technology, Inc. is now manufacturing the Striker Control Device.
What is the Striker Control Device?
The Striker Control Device (SCD) is a cover plate for your Glock pistol that blocks the rearward motion of the striker when thumb pressure is applied to the back of the slide – similar to a hammer on a DA/SA hammer fired pistol. It was originally developed by Tom Jones and Todd Louis Green from the inspiration of double action hammer fired pistols, where shooters are taught to keep their thumb on the hammer when holstering. Keeping your thumb on the back of the hammer gives you positive feedback should something be caught in the trigger guard to prevent the gun from firing. The SCD does just that for the Glock striker fired pistols.
- The SCD blocks movement of the trigger bar and prevents the trigger from moving.
- The SCD does not lock or otherwise interfere with the normal operation of the pistol unless physical force is being purposely applied by the user. When using any normal firing grip (IE: hand is not on the back of the slide), the SCD is not engaged, acting as a traditional back plate.
- Installation of the SCD requires you to remove the existing backplate and install the SCD.
The LTT SCD works with all of the Gen 5 Glock pistols (yes, this includes the Glock 20).
The Slim Frame & Full Size SCD DO NOT fit or function with the Glock 42.
Please Note: The SCD will NOT function correctly with the Glock® Performance Trigger or Timney Triggers, as these trigger options causes the striker to become fully tensioned, defeating the purpose/function of the SCD.
The roll pin that joins the two parts of the SCD is a wear item and we recommend replacing it every 8,000 rounds. Included in this package are two replacement roll pins for when maintenance is necessary
